UDEMY Process Simulation with Aspen HYSYS BOOKWARE-iLEARN

iLEARN
source: https://www.udemy.com/
looking for locations in:
10 GBit .SE
10 GBit .NO
and other european locations

44M	1. 1. Introduction to the Simulation Basis Manager.mp4
82M	10. 2. Building the Simulation.mp4
30M	11. 3. Adding Unit operation information.mp4
51M	12. 4. Analyzing the results.mp4
21M	13. 1. Process Overview.mp4
132M	14. 2. Building the Simulation.mp4
62M	15. 2.1 Installing recycle.mp4
58M	16. 3. Unit functions.mp4
38M	17. 4. Analyzing the results.mp4
32M	18. 1. Introduction to the process.mp4
122M	19. 2. Accounting for Water Content using Aspen HYSYS.mp4
54M	2. 2. Defining the Simulation Basis.mp4
70M	20. 3. Hydrate Calculations in Aspen HYSYS.mp4
50M	21. 4. Water Dew Point Calculation.mp4
50M	22. 5. Hydrate Inhibition.mp4
33M	23. 1. Process and Column Overview.mp4
117M	24. 2. Building the Simulation - PART I.mp4
80M	25. 3. Building the Simulation - PART II.mp4
31M	26. 4. Hydrate Formation Utility.mp4
51M	27. 5. Analyzing the results.mp4
30M	28. 1. Process Overview.mp4
187M	29. 2. Building the Simulation.mp4
12M	3. 2.1 Property Package Selection.mp4
29M	30. 3. Analyzing the results.mp4
32M	31. 4. Pressure drop consideration in pipe segment.mp4
25M	32. 1. Introduction.mp4
73M	33. 2. Compressor Curves.mp4
71M	34. 3. Pump Curves.mp4
47M	35. 1. Process Overview.mp4
99M	36. 2. Building the Simulation - PART I.mp4
114M	37. 3. Building the Simulation - PART II.mp4
36M	38. 4. Analyzing the results.mp4
67M	4. 3. Building up simulation.mp4
55M	5. 3.1 Unit Selection and input data specification.mp4
23M	6. 3.2 Adding Utility.mp4
36M	7. 4. Analyzing the results and customizing the workbook.mp4
23M	8. 5. Finishing the simulation and printing the case.mp4
53M	9. 1. Process Overview.mp4
2.2G	total